Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in St. Paul?
Panel replacement in St. Paul typically costs $250 to $500 for a standard residential door, with most single-section jobs landing near the middle of that range. The price depends on how many panels are damaged, the material and profile of the door you already have, and whether the section can be swapped on its own or the whole door needs rebalancing afterward. That range is an estimate only: the written estimate we give you on site sets the final price.
If your door took a hit this winter and you’re staring at a dented or cracked section, we can tell you quickly whether a panel swap is realistic for your door. Call (888) 270-3708 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical panel replacement in St. Paul runs $250 to $500, all in, for a standard single panel.
- Matching by brand and profile matters more than anything: Clopay, Amarr, Wayne Dalton, Raynor, and other makers each use different panel dimensions.
- St. Paul’s freeze-thaw cycles and heavy snow load are the leading causes of bent panels and popped hinges that lead to panel work.
- We work on the brand you already have, so a panel repair doesn’t turn into a forced full replacement.
- The written estimate is the price. No surprises on the invoice.
Panel Replacement Cost Breakdown (2026)
Here’s how panel replacement breaks down in typical St. Paul jobs. Each line is an estimate for a single-family home with a standard two-car or one-car garage door.
| Job | Typical Estimated Range |
|---|---|
| Single steel panel replacement (bottom or middle section) | $250 – $500 |
| Two or more panels replaced in one visit | Priced per additional panel |
| Panel replacement with hinge and roller inspection | Included in the visit |
| Related: Track realignment (if the panel was bent by a track hit) | $120 – $240 |
| Related: Roller replacement (often paired with panel work) | $110 – $220 |
| Related: Cable repair (if a cable failed and caused the panel to drop) | $130 – $250 |
| Related: Spring repair, per spring (if the panel damage is secondary) | $180 – $340 |
An important note on springs, since they come up a lot when panels get damaged: that spring range is for one spring. Springs are almost always replaced as a matched pair, so a pair costs about twice that range. We’ll tell you plainly at the estimate whether a spring is part of your job or whether it’s fine.
What pushes a panel replacement toward the top of the range? A specialty profile that has to be matched from a manufacturer, wood or composite material instead of steel, glass-insert panels, or a section that needs two techs to handle safely because it’s high on the door. What keeps it toward the bottom? A standard steel bottom section from a common brand, a door with clear access and no track damage, and a job that goes in and balances on the first try. Garage doors are all we do, so we’ve seen the difference between a clean swap and a job with surprises.
What Affects Panel Replacement Pricing in St. Paul
- Brand and profile match. Every manufacturer uses different panel dimensions, ribbing, and stamp patterns. A Clopay bottom panel doesn’t drop into an Amarr door, and a Wayne Dalton panel won’t match a Raynor. We service all eight of the widely installed brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – which means your existing door can usually be repaired rather than replaced. If you’re not sure what brand you have, we can identify it at the estimate.
- Material of the existing door. Steel panels are the most common and the most economical to replace. Wood and composite sections cost more because they need staining or painting to look right after the swap. Insulated panels cost more than uninsulated ones, and the difference shows up on the invoice.
- Number of panels damaged. One dented bottom panel is the standard job. If a car bumper or a snowbank took out the bottom section and bent the second panel too, you’re buying more panels and more labor. We quote per panel so you know what each one adds.
- St. Paul winters and freeze-thaw. Snow load from roof shedding, ice dams dripping down the face of the door, and plow spray off the alley all beat up bottom panels in St. Paul. Winter damage is the single most common reason homeowners here call us for panel work. Homeowners in Highland Park, Macalester-Groveland, and the East Side tend to see more plow damage because of the alley-access garages and street-parked cars that back in close.
- Whether the track or hinges took a hit too. If the panel was bent by a car strike or a fallen branch, the tracks may be out of alignment and hinges may be bent. Track realignment ($120 – $240) and roller replacement ($110 – $220) sometimes get added to the visit so the door runs clean when the new panel goes in.
- Access and height. A high-lift or low-headroom setup, or a door with very little clearance where the panel has to be handled, adds a bit of labor. Standard two-car doors are straightforward; carriage-style and oversized doors take more time.
The place to start, if you want a straight answer on your door specifically, is a free estimate. We’ll look at the panel, the brand, and the hardware, and tell you what the job involves before any work starts. Our technicians have up to 8 years of experience, and they’ve seen how St. Paul’s winters treat garage doors – what looks like a big repair often turns out to be a smaller one once we’re on site.
How to Save on Panel Replacement
Panel replacement is one of the more economical repairs in the garage-door world, so there’s less wiggle room than there is with a full door replacement. Still, there are a few things that keep the price down.
- Fix the panel before the door fails around it. A small dent or a rust spot on the bottom section is a cheap fix. A panel that’s separating from its hinges and dragging on the track is a bigger job, because now the track and rollers are in it too. Catching it early is the single biggest saver.
- Keep your existing brand. Because we work on the brand you already have, you’re not pushed into replacing an entire door because the technician “doesn’t do” that brand. Panel replacement beats a full door replacement any day of the week on price.
- Don’t combine a panel replacement with a spring change unless the spring is actually failing. If the door is running smoothly and the spring is quiet, it doesn’t need to be swapped just because a panel is being done. We’ll tell you what’s actually worn out and what isn’t, and you decide.
- Bundle related hardware in one visit. If the rollers are worn and the tracks are out of alignment, doing them in the same visit as the panel replacement usually costs less than scheduling two separate calls.
- Ask for the estimate in writing before work starts. Free estimates mean you know the price before anything is done. Call Harvest Garage Door Repair at (888) 270-3708 and we’ll set up a visit.
One more thing worth saying plainly: if you’re comparing quotes, the cheapest number isn’t always the cheapest job. A panel that isn’t matched to your door’s profile can leave a visible seam or a door that binds. A cheaper quote that skips the balancing step will come back as a second repair. Ask what’s included. We tell you what we’re doing and why before we do it.
Can Panel Replacement Be Done Same Day in St. Paul?
Panel replacement is usually a same-day job when the panel is in stock and the job is a standard single section. Most visits take an hour or two depending on the door. Call (888) 270-3708 to check what’s available for your door. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
If the panel needs to be ordered because it’s a specialty profile or a less common brand, the wait is usually a few days to a couple of weeks, and we’ll tell you the timeline up front so you can plan around it.
FAQs – Panel Replacement Cost
How much does panel replacement cost in St. Paul?
Panel replacement in St. Paul typically costs $250 to $500 for a standard single panel, with the estimate depending on the material and brand match. Call (888) 270-3708 for an exact quote – estimates are free.
Is it cheaper to replace one panel or the whole door?
Replacing one panel is almost always cheaper than a whole door: a single panel runs $250 to $500, while a new door installation typically runs $700 to $2,200. A panel swap is the right fix whenever the rest of the door is sound. Call us and we’ll tell you honestly which your door needs.
Can you match my existing garage door brand for a panel?
Yes. We work with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we can usually source a matching panel for the door already on your home. Call (888) 270-3708 to confirm your brand.
Does a dented panel really need to be replaced?
Sometimes not. A small cosmetic ding can be left alone, but a panel that’s bent enough to bind in the track or let water in should be replaced. The range is $250 to $500, so a look-see is worth it. Call for a free estimate and we’ll tell you straight.
How long does a panel replacement take?
A standard single-panel replacement typically takes one to two hours on site, and it’s usually the same day if the panel is in stock. Call (888) 270-3708 to schedule.
Do you service the St. Paul area for panel work?
Yes, we serve St. Paul and the surrounding neighborhoods, including Highland Park, Macalester-Groveland, and the East Side. Call (888) 270-3708 for a free estimate.
Talk to Us About Your Door
If your panel is dented, cracked, or binding, the fix is usually simpler and cheaper than homeowners expect. We look at the whole door – panel, track, rollers, springs, opener – and give you a written estimate before any work starts. If it’s the door, the opener, or both, we handle it under the same roof. Garage doors are all we do.
Call (888) 270-3708 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the St. Paul market as of 2026. Harvest Garage Door Repair offers free estimates – call (888) 270-3708.
Written by the team at Harvest Garage Door Repair.
What Our Customers Say
"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Jason Sullivan"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Brooke Lawson"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Tim Thompson